Every field marked [like this] has to be filled in with real data before
this document is issued to anyone. Most of it has to come from whoever manufactures and
formulates the powder — you cannot work it out yourself, and you must not estimate it.
Until it is complete and signed off, do not publish this, do not email it to a school,
and do not link to it from the website.
Safety Data Sheet · in accordance with Regulation (EC) No 1907/2006 (REACH) Annex II, as retained in GB law
Shake2Make ready-mixed paint powder
Revision[00]
Date of issue[DD Month YYYY]
Supersedes[n/a — first issue]
SDS number[S2M-SDS-001]
1Identification of the substance/mixture and of the company
Product identifier
Shake2Make ready-mixed paint powder [add the colour range and each colour's product code]
Product form
Mixture. Solid powder, supplied in single-dose sachets.
Identified use
Powder colourant for mixing with tap water to produce water-based poster paint. For use in schools, nurseries and early years settings, prepared by an adult.
Uses advised against
Not for face or body painting. Not for use on skin. Not a food product. Not for use in any application other than that stated above.
Supplier
Shake2Make Ltd, 2nd Floor College House, 17 King Edwards Road, Ruislip, London HA4 7AE, United Kingdom Company number [company registration number]
Email of competent person
[the address that will actually be monitored, e.g. safety@shake2make.co.uk]
Emergency telephone
[number, and the hours it is answered — if it is not 24 hours, say so]
On the emergency number
Annex II expects a contact that can be reached in an emergency. If you cannot staff one
around the clock, state the hours plainly and give NHS 111 and the National Poisons
Information Service as the out-of-hours route. Do not list a number that rings out.
2Hazards identification
2.1 Classification under GB CLP
[Your formulator must classify the mixture. Either a classification with
hazard classes and categories, or the statement "Not classified as hazardous under GB CLP".
This is a calculation from the ingredients, not a judgement call.]
2.2 Label elements
[Pictograms, signal word, hazard statements (H) and precautionary
statements (P) — or "None required" if not classified.]
2.3 Other hazards
The powder is a fine solid and can become airborne when a sachet is opened or poured. Avoid raising dust.
Spilled powder on a hard floor becomes slippery when wet.
[Does the mixture contain any PBT or vPvB substance, or any endocrine disrupting substance? Your formulator must confirm. State the answer either way.]
Why this section decides whether you need an SDS at all
If the mixture is not classified as hazardous and contains no substance above the
Annex II thresholds, you may not be legally obliged to supply an SDS. Schools will ask for
one regardless, and a COSHH file expects one. Many suppliers in your position issue this
document and head it "Safety Data Sheet — not classified as hazardous", which is both
honest and useful. Your formulator tells you which situation you are in.
3Composition / information on ingredients
Mixture.
Ingredient
Identifiers
%
Classification
[name]
[CAS / EC / REACH reg no]
[range]
[GB CLP classification]
[name]
[CAS / EC / REACH reg no]
[range]
[GB CLP classification]
[Add a row per ingredient that must be disclosed. Your formulator decides which, based on classification and concentration thresholds. Pigments, extenders, binder, dispersant, preservative and any anti-dust agent are the usual candidates.]
Trade secrets
You do not have to publish a full recipe. You do have to disclose any ingredient that is
classified, or present above the relevant threshold. If your manufacturer refuses to tell
you what is in it to that level of detail, that is a supplier problem rather than a
paperwork problem — you cannot place the product on the market without this.
4First aid measures
4.1 Description of first aid measures
Inhalation of dust
Move the person to fresh air and keep them comfortable. If breathing is difficult or irritation persists, get medical advice. [confirm with formulator]
Skin contact
Wash with soap and water. [Add what to do if irritation develops, per the classification.]
Eye contact
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If irritation persists, get medical advice. [confirm]
Ingestion
Rinse the mouth. Do not induce vomiting. Give a little water to drink if the person is conscious. Get medical advice if a significant quantity has been swallowed or if the person is unwell. [confirm]
4.2 Most important symptoms and effects
[From the toxicological data in section 11 — acute and delayed.]
4.3 Indication of any immediate medical attention needed
Treat symptomatically. Show this Safety Data Sheet to the attending doctor or to NHS 111.
[Add any specific antidote or contraindication if one applies.]
Write this section for the person who will read it
In a nursery it will be read by a practitioner holding a crying three-year-old, not by a
chemist. Short sentences, plain words, the action first. It is the one section of an SDS
that gets used under pressure.
5Firefighting measures
Suitable extinguishing media
Water spray, foam, dry powder or carbon dioxide. Use media appropriate to the surrounding fire. [confirm]
Unsuitable media
Do not use a high-pressure water jet — it will disperse the powder. [confirm]
Hazards from the product
[What does it give off on combustion? Your formulator must say. Do not guess.]
Advice for firefighters
Wear self-contained breathing apparatus and full protective clothing. [confirm]
6Accidental release measures
6.1 Personal precautions
Avoid raising dust. Avoid breathing it in. Keep children away from the spill.
6.2 Environmental precautions
Do not allow quantities to enter drains or watercourses. [Scale this to the ecological data in section 12.]
6.3 Methods for cleaning up
Dry powder: sweep or vacuum up carefully, without raising dust, and place in a closed container. Do not use compressed air.
Mixed paint: absorb with paper towel or an inert absorbent, then wash the area with water and detergent.
A classroom-scale spill of one or two sachets can be cleared by staff with ordinary care. [Confirm this is right once classified.]
7Handling and storage
7.1 Precautions for safe handling
An adult opens the sachet and mixes the paint. Children use the paint once it is mixed, not the powder.
Open the sachet low down, close to the bottle, and pour steadily rather than tipping, to keep dust down.
Mix in a ventilated room. Do not mix with a fan blowing across the bottle.
Wash hands after handling the powder.
Do not eat, drink or smoke while handling it.
7.2 Conditions for safe storage
Store the sachets dry, out of reach of children, in the original packaging.
[Temperature and humidity range from the formulator.]
Keep away from [incompatible materials, from section 10].
Shelf life [period] unopened. Mixed paint should be used within [period] and not kept beyond [period].
8Exposure controls / personal protection
8.1 Control parameters
[Any Workplace Exposure Limit (EH40) for an ingredient, or "No workplace exposure limits assigned to the ingredients of this mixture". DNELs and PNECs where they exist.]
8.2 Exposure controls
Engineering controls
Normal classroom ventilation is sufficient for mixing single sachets. [Confirm, and state what is needed for larger-scale decanting if anyone does that.]
Eye protection
[Required, or not required for the stated use?]
Hand protection
Not normally required for mixing single sachets. Wash hands afterwards. [confirm]
Respiratory protection
Not required for the stated use. [confirm]
Thermal hazards
None.
9Physical and chemical properties
Every row here is measured, not estimated. Ask your manufacturer for their technical data
sheet and copy the figures across.
Physical state
Solid powder
Colour
[per colour in the range]
Odour
[odourless?]
pH
[of the mixed paint, and at what dilution]
Melting / freezing point
[value or "not applicable"]
Flash point
[value or "not applicable — solid"]
Flammability
[value]
Relative density / bulk density
[value]
Solubility in water
[disperses / soluble — and the mixing ratio]
Particle characteristics
[particle size distribution — this is the one that matters for the dust question]
Other
[viscosity, explosive properties, oxidising properties, decomposition temperature, vapour pressure — state "not applicable" where that is the honest answer]
10Stability and reactivity
Reactivity
[formulator]
Chemical stability
Stable under the storage conditions in section 7. [confirm]
Hazardous reactions
[None known? Confirm.]
Conditions to avoid
Damp and humidity, which will cause the powder to cake. [add others]
Incompatible materials
[formulator]
Hazardous decomposition products
[formulator]
11Toxicological information
[Acute toxicity by each route, skin corrosion/irritation, serious eye
damage/irritation, respiratory or skin sensitisation, germ cell mutagenicity,
carcinogenicity, reproductive toxicity, STOT single and repeated exposure, aspiration hazard.
Give the data or state "no data available" — but "no data available" on a product going to
nurseries is a question your buyers will ask about, so get the data.]
This section and EN 71-3 are not the same thing
EN 71-3 tests how much of certain elements can migrate out of a toy material if a child
sucks or swallows it. It is a toy-safety test on the finished product. Section 11 here is
about the toxicology of the mixture as a chemical. You need both, and one does not stand in
for the other.
12Ecological information
Aquatic toxicity
[acute and chronic, per ingredient]
Persistence and degradability
[data]
Bioaccumulative potential
[data]
Mobility in soil
[data]
PBT and vPvB assessment
[result]
Endocrine disrupting properties
[result]
Other adverse effects
[result]
Careful here
This is the section people are tempted to decorate. Put the measured data in it and nothing
else. Anything you say about the product's environmental performance has to be backed by
evidence you hold, under the Green Claims Code and the DMCC Act — and an SDS is exactly the
document a trading standards officer would read back to you.
13Disposal considerations
Unused powder and sachets:[Can these go in general waste? Give the EWC code if one applies.]
Mixed paint: small quantities of water-based paint [may / may not] be washed to foul drain. [Confirm, and say so plainly — settings ask this constantly.]
Empty sachets:[material and whether it is recyclable in practice, not just in theory. If kerbside collections won't take it, say that.]
Bottles: HDPE, widely recycled, at end of life. Designed for repeated reuse first.
Dispose of in accordance with local authority requirements.
14Transport information
UN number
[or "Not regulated for transport"]
UN proper shipping name
[or "n/a"]
Transport hazard class
[or "n/a"]
Packing group
[or "n/a"]
Environmental hazards
[marine pollutant? yes/no]
Special precautions
[or "none"]
Bulk transport
Not applicable — supplied in single-dose sachets.
15Regulatory information
15.1 Safety, health and environmental regulations specific to the product
Regulation (EC) No 1907/2006 (REACH), as retained in GB law.
Regulation (EC) No 1272/2008 (CLP), as retained in GB law — GB CLP.
Toys (Safety) Regulations 2011 — children's paint is a toy in law. Compliance requires the applicable parts of BS EN 71, a Declaration of Conformity, technical documentation and UKCA marking.
BS EN 71-3 migration of certain elements. [Report reference and date once held.]
BS EN 71-1 mechanical and physical properties, as applicable to the sachet and bottle. [Report reference once held.]
[Ask your test house whether EN 71-7 (finger paints) or EN 71-9/-10/-11 (organic chemical compounds) apply to this product. If children apply the paint with their hands, EN 71-7 is a real question and the limits are stricter.]
Control of Substances Hazardous to Health Regulations 2002 (COSHH) — applies to the setting using the product.
15.2 Chemical safety assessment
[Has one been carried out? State yes or no.]
16Other information
Full text of the hazard statements referred to above
[Write out every H-statement in full, or "None".]
Revision history
Revision
Date
What changed
[00]
[date]
First issue
Prepared by
[Name and role of the competent person who compiled this, and the date.]
Before you issue this
Have it reviewed by someone qualified to classify a mixture — your manufacturer's technical
department, or a consultant. An SDS is a legal document and the supplier carries the
responsibility for it being right, not the manufacturer. The fee for an hour of a
toxicologist's time is small against getting this wrong on a product used by children.
Shake2Make Ltd · 2nd Floor College House, 17 King Edwards Road, Ruislip, London HA4 7AE ·
info@shake2make.co.uk
The information in a completed version of this sheet describes the product
only in respect of health, safety and environmental requirements. It is not a specification
and implies no warranty of any particular property. It is the user's responsibility to
satisfy themselves that the product is suitable for their intended use.